Crane FEM Consulting
Featured projects
Structural analysis for 2 STS cranes relocation
For the given ship accelerations and weather conditions structural strength (static and…
Rail clamp strength analysis
The rail clamp is a safety device that is designed to prevent…
Gantry crane (portal boom crane) structure analysis due to surveying the possibility of the crane productivity increasing
The crane has been checked for the possibility to work with the…
3rd party service RTG crane height increase
3rd party in RTG crane height increase from 18 to 21 meters.…
Portal level luffing boom crane Structural Analysis
Structural design of a new portal level luffing boom crane ‘MARK-36’ for…
Structural analysis for the Quay Crane modification project
Structural analysis for the Quay Crane modification project. The crane outreach was…
Assessment of the technical possibility of the Ship Loader crane modernization (productivity increasing)
In order to check the possibility of the Ship Loader productivity increase…
Inspection of the quay crane and determination of the cause of plastic deformation of its boom
Plastic deformations have been detected in the boom structure. The crane’s warranty…
Static strength and residual life assessment for Quay crane trolley frame reinforcement
The trolley frame Structural analysis has been done as a part of…
Two Quay Cranes structural survey and analysis
The static strength was checked for loads and trolley position during the…
3rd party consultancy
As a third Party Consultant we help our clients with the following topics that are listed below but not limited by them:
- to check structural/mechanical analysis performed by manufacturer for the case when the client purchases the material lifting equipment, performing modernization and repair
- perform structural analysis and mechanism to check the existing crane or a crane which is being designed
- investigate the cause of the existing problems of the crane (structure / mechanisms),
i.e. premature crack investigation, structure plastic deformation appearance etc
- analyse residual life of the crane
- perform structural survey
Structual Analysis
Structural analysis of material handling machines. Crane element connections (pins, hinges, bolted flange, welding) strength calculation.
Structural survey
Structural survey of crane structure using Non Destructive Testing, strain gauge measurements, vibration measurements
Crane Mechanism design
The crane mechanism design consists from the calculation of the forces acting on the mechanism during its operating and finding the mechanism power.
About
Maksym has more than 10 years of mechanical engineering experience in different countries, like Singapore, Norway. He has designed the crane structures, performed structural survey, taken part in consultancy projects.
more