-
Rail clamp strength analysis
The rail clamp is a safety device that is designed to prevent a crane from moving along the rail when…
-
Gantry crane structure analysis due to s
The crane has been checked for the possibility to work with the maximal lifting load of 40t at all outreaches.…
-
3rd party service RTG crane height incre
3rd party in RTG crane height increase from 18 to 21 meters. Performed RTG structural analysis (fatigue, buckling and static…
-
Portal level luffing boom crane Structur
Structural design of a new portal level luffing boom crane ‘MARK-36’ for KONECRANES Ukraine was done using FEM 1.001. The…
-
Structural analysis for the Quay Crane m
Structural analysis for the Quay Crane modification project. The crane outreach was going to be increased so the FEM analysis…
-
Assessment of the technical possibility
In order to check the possibility of the Ship Loader productivity increase the following has been done Structure, safety devices,…
-
Inspection of the quay crane and determi
Plastic deformations have been detected in the boom structure. The crane’s warranty period hadn’t expired at that time. The manufacturer…
-
Static strength and residual life assess
The trolley frame Structural analysis has been done as a part of whole crane repair project. As a result the…
-
Two Quay Cranes structural survey and an
The static strength was checked for loads and trolley position during the crane normal working cycle for five positions of…
-
The Quay Crane repair quality assessment
4 Quay cranes have been surveyed. In order to decrease the significant structure vibration during the Quay Crane operating the…
-
Determining Condition of the Ship-to Sho
The goal of this project was to determine the possibility and conditions of further operation of the ship-to-shore crane manufactured…
-
LIEBHERR Deck Crane
During Deck crane structural survey the plastic deformation of a lug of jib-column joint was found. It was to be…
Crane FEM Consulting
